Cannabis Consulting
California Cannabis California Cannabis Business License Compliance Cultivation Indoor Medium Medicinal M Type 3a

California Cannabis Business License Compliance Cultivation Indoor Medium Medicinal M Type 3a, 2020 Career News, Information & Updates


California Cannabis Cultivators


Frequently Asked Questions

What is a Type 2B (Cultivation; Mixed-light; Small)?

Type 2B, or “small mixed-light,” for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What are the fines for violations?

For minor violations, the fine range is $100-500.
For moderate violations, the fine range is $501-$1,000.
For serious violations, the fine range is $1,001-$5,000.
For guidance on what constitutes a minor, moderate, or serious violation, refer to our regulations page.

Do plants for seed products need to be tagged with a UID?

Yes, all plants or portions thereof that are used for seed production need to be tagged with a UID.

What are the Generator Requirements?

Licensees using generators rated at fifty (50) horsepower and greater shall demonstrate compliance with Airborne Toxic Control Measures. Compliance shall be demonstrated by providing a copy of one of the following to the CalCannabis department upon request:
(1) A Portable Equipment Registration Certificate provided by the California Air Resources Board, or;
(2) A Permit to Operate obtained from the Local Air District with jurisdiction over the licensed premises.
Licensees using generators rated below fifty (50) horsepower shall designate the generator as emergency or low use, meet Tier 3 with level 3 diesel particulate filter requirements, and meet Tier 4 engine requirements.
All generators shall be equipped with nonresettable hour-meters.

Can cultivation licensees make material physical modification of premises?

Cultivation licensees cannot make material physical modifications of the licensed premises if it materially or substantially alters the licensed premise of the use thereof from the premises diagram without prior written approval by the department.

What should be included in a pest management plan?

Product name and active ingredient(s) of all pesticides to be applied to cannabis during any stage of plant growth. Integrated pest management protocols, including chemical, biological and cultural methods the applicant anticipates using to control or prevent the introduction of pests on the cultivation site.

Do applicants need Track-and-Trace Training

Yes. Each applicant shall register for track-and-trace system training provided by the department within ten (10) business days of receiving notice from the department that their application for licensure has been received and is complete. Documentation of training completion shall be provided to the department within ten (10) business days of completion. Applicants approved for an annual license shall not have access to the track-and-trace system until the licensee’s designated account manager has completed, and provided proof of completion, of the track-and-trace training prescribed by the department.

According to the federal Controlled Substances Act, what type of drug is cannabis?

According to the federal Controlled Substances Act, Cannabis is a Schedule I drug.

What does a detailed premises diagram include?

A detailed premise diagram must show all boundaries and dimensions (in feet) of the following areas:
(A) Canopy area(s), including aggregate square footage if the canopy areas are noncontiguous;
(B) Area(s) outside of the canopy where only immature plants shall be maintained, if applicable;
(C) Designated pesticide and other agricultural chemical storage area(s);
(D) Designated processing area(s) if the licensee will process on site;
(E) Designated packaging area(s) if the licensee will package products on site;
(F) Designated composting area(s) if the licensee will compost cannabis waste on site;
(G) Designated secured area(s) for cannabis waste if different than subsection (F) above;
(H) Designated area(s) for harvested cannabis storage;

What are the requirements of a Lighting Diagram?

A Lighting Diagram must include location of all lights in the canopy areas and maximum wattage of each light.

What is the Cannabis Waste Management Requirements?

Among other things, a licensee shall dispose of cannabis waste in a secured waste receptacle or in a secured area on the licensed premises designated on the licensee’s premises diagram and as identified in the licensee’s cultivation plan. For the purposes of this section, “secure waste receptacle” or “secured area” means that physical access to the receptacle or area is restricted only to the licensee, employees of the licensee, or the local agency, a waste hauler franchised or contracted by a local agency, or a private waste hauler permitted by the local agency. Public access to the designated receptacle or area shall be strictly prohibited.
Transportation of self-hauled cannabis waste shall only be performed by the licensee or employees of the licensee.
A licensee shall maintain accurate and comprehensive records regarding cannabis waste that account for, reconcile, and evidence all activity related to the generation or disposition of cannabis waste.

What are the Pesticide Use Requirements?

Licensees shall comply with all pesticide laws and regulations enforced by the Department of Pesticide Regulation.
For all pesticides that comply with subsection (a) above and are exempt from registration requirements, licensees shall comply with the following pesticide application and storage protocols:
(1) Comply with all pesticide label directions;
(2) Store chemicals in a secure building or shed to prevent access by wildlife;
(3) Contain any chemical leaks and immediately clean up any spills;
(4) Apply the minimum amount of product necessary to control the target pest;
(5) Prevent offsite drift;
(6) Do not apply pesticides when pollinators are present;
(7) Do not allow drift to flowering plants attractive to pollinators;
(8) Do not spray directly to surface water or allow pesticide product to drift to surface water. Spray only when wind is blowing away from surface water bodies;
(9) Do not apply pesticides when they may reach surface water or groundwater; and
(10) Only use properly labeled pesticides

What is a Type 4 (Cultivation; Nursery)?

Type 4, or “nursery” for cultivation of cannabis solely as a nursery.

What is a Type 1B (Cultivation; Specialty mixed-light; Small)?

Type 1B, or “specialty mixed-light,” stands for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, of between 2,501 and 5,000 square feet of total canopy size on one premises.

What are the required General Environmental Protection Measures?

All licensees shall comply with all of the following environmental protection measures:
Compliance with section 13149 of the Water Code as implemented by the State Water Resources Control Board, Regional Water Quality Control Boards or California Department of Fish and Wildlife.
Compliance with any conditions requested by the California Department of Fish and Wildlife or the State Water Resources Control Board under section 26060.1(b)(1) of the Business and Professions Code.
All outdoor lighting used for security purposes shall be shielded and downward facing.
Immediately halt cultivation activities and implement section 7050.5 of the Health and Safety Code if human remains are discovered.
Requirements for generators pursuant to section 8306 of this chapter.
Compliance with pesticide laws and regulations as enforced by the Department of Pesticide Regulation pursuant to section 8307 of this chapter.
Mixed-light license types of all tiers and sizes shall ensure that lights used for cultivation are shielded from sunset to sunrise to avoid nighttime glare.

What is a Type 1A (Cultivation; Specialty indoor; Small)?

Type 1A, or “specialty indoor,” stands for indoor cultivation using exclusively artificial lighting of between 501 and 5,000 square feet of total canopy size on one premises.

What are the Cultivation Requirements for Processor Licenses?


(a) All aggregation of product shall adhere to track-and-trace requirements.
(b) Licensees may produce nonmanufactured cannabis products without a manufacturing license, provided compliance with packaging and labeling requirements.
(c) Cultivation of cannabis plants is prohibited at a licensed processor premises.

Are there Sales Invoice or Receipt Requirements?

The licensee shall prepare a sales invoice or receipt for every sale, transport, or transfer of cannabis or nonmanufactured cannabis product to another licensee. Sales invoices and receipts may be retained electronically but must be readily accessible for examination by the department, other state licensing authorities, any state or local law enforcement authority, and the California Department of Tax and Fee Administration.
For complete requirements, refer to our regulations page.

Who can licensees transfer their harvested cannabis to?

Licensees can transfer their harvested cannabis to a licensed processor,, manufacturer or distributor via a licensed distributor.

What is a Type 1C (Cultivation; Specialty cottage; Small)?

Type 1C, or “specialty cottage,” stands for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, of 2,500 square feet or less of total canopy size for mixed-light cultivation, up to 25 mature plants for outdoor cultivation, or 500 square feet or less of total canopy size for indoor cultivation, on one premises.

What is a Type 5B (Cultivation; Mixed-light; Large)?

Type 5B, or “mixed-light,” means for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, greater than 22,000 square feet, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What is a Type 3 (Cultivation; Outdoor; Medium)?

Type 3, or “outdoor,” stands for outdoor cultivation using no artificial lighting from 10,001 square feet to one acre, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.

What is a Type 2 (Cultivation; Outdoor; Small)?

Type 2, or “small outdoor,” stands for outdoor cultivation using no artificial lighting between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What type of licensees need a Cultivation Plan?

Specialty Cottage, Specialty, Small and Medium licenses need a detailed premises diagram.

Do licensees need a nursing license if they propogate immature plants for distribution or seed for distribution to another licnesee.

Yes. Licensees need a nursing license if they propogate immature plants for distribution or seed for distribution to another licnesee.

What are the Renewable Energy Requirements?

Beginning January 1, 2023, all indoor, tier 2 mixed-light license types of all sizes, and nurseries using indoor or tier 2 mixed-light techniques, shall ensure that electrical power used for commercial cannabis activity meets the average electricity greenhouse gas emissions intensity required of their local utility provider.

What is a Type 5 (Cultivation; Outdoor; Large)?

Type 5, or “outdoor,” means for outdoor cultivation using no artificial lighting greater than one acre, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What does a Cultivation Plan require?

Cultivation Plans require: Detailed Premises Diagram, Pest Management Plan, and a Cannabis Waste Management Plan.

What is a Type 3B (Cultivation; Mixed-light; Medium)?

Type 3B, or “mixed-light,” for cultivation using a combination of natural and supplemental artificial lighting at a maximum threshold to be determined by the licensing authority, between 10,001 and 22,000 square feet, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.

What is a Type 5A (Cultivation; Indoor; Large)?

Type 5A, or “indoor,” means for indoor cultivation using exclusively artificial lighting greater than 22,000 square feet, inclusive, of total canopy size on one premises.
No Type 5, Type 5A, or Type 5B cultivation licenses may be issued before January 1, 2023.
Commencing on January 1, 2023, a Type 5, Type 5A, or Type 5B licensee may apply for and hold a Type 6 or Type 7 license and apply for and hold a Type 10 license. A Type 5, Type 5A, or Type 5B licensee shall not be eligible to apply for or hold a Type 8, Type 11, or Type 12 license.

What is a Type 3A (Cultivation; Indoor; Medium)?

Type 3A, or “indoor,” stands for indoor cultivation using exclusively artificial lighting between 10,001 and 22,000 square feet, inclusive, of total canopy size on one premises. The Department of Food and Agriculture shall limit the number of licenses allowed of this type.

What type of license needs a Lighting Diagram?

Lighting Diagrams are required for mixed-light types applications (Specialty Cottage, Specialty, Small and Medium).

What records need to be maintained on the licensed premises?

Department issued cultivation license(s)
Cultivation plan
All records evidencing compliance with the environmental protection measures
All supporting documentation for data or information input into the track-and-trace system;
All UIDs assigned to product in inventory and all unassigned UIDs. UIDs associated with product that has been retired from the track-and-trace system must be retained for six (6) months after the date the tags were retired; Financial records related to the licensed commercial cannabis activity, including but not limited to, bank statements, tax records, sales invoices, and sales receipts; Personnel records, including each employee’s full name, social security, or individual tax payer identification number, date of beginning employment, and date of termination of employment if applicable; Records related to employee training for the track-and-track system or other requirements of this chapter. Records shall include, but are not limited to, the date(s) training occurred, description of the training provided, and the names of the employees that received the training; Contracts with other state licensed cannabis businesses; Permits, licenses, and other local authorizations to conduct the licensee’s commercial cannabis activity; Records associated with composting or disposal of cannabis waste. Documentation associated with loss of access to the track-and-trace system.

What is a Type 2A (Cultivation; Indoor; Small)?

Type 2A, or “small indoor,” stands for indoor cultivation using exclusively artificial lighting between 5,001 and 10,000 square feet, inclusive, of total canopy size on one premises.

What are the records and reporting requirements?

Each licensee shall keep and maintain the records listed in subsection (d) for at least seven (7) years from the date the document was created.
Records shall be kept in a manner that allows the records to be provided at the licensed premises or delivered to the department, upon request.

What is a Type 1 (Cultivation; Specialty outdoor; Small)?

Type 1, or “specialty outdoor,” stands for outdoor cultivation using no artificial lighting of less than or equal to 5,000 square feet of total canopy size on one premises, or up to 50 mature plants on noncontiguous plots.

What are the flowering requirements?

Cannabis plants maintained outside of the designated canopy area(s) for specialty cottage, specialty, small and medium licenses are prohibited from flowering. Should plants outside of the canopy area(s) begin to flower, a UID shall be applied, the plant(s) shall be moved to the designated canopy area without delay, and reported in the track-and-trace system.

Can Nurseries maintain an area for research and development?

Yes. Nurseries may maintain a research and development area, as identified in their cultivation plan, for the cultivation of mature plants. All mature plants shall be tagged with a UID. All products derived from these plants are prohibited from entering the commercial distribution chain.


State Authority & Contact:

CalCannabis Cultivation Licensing (CA Department of Food & Agriculture)
1220 N Street, Sacramento, CA 95814
Phone: 1-833-CALGROW (1-833-225-4769)
Email: calcannabis@cdfa.ca.gov

Scope of Licenses:

Medicinal (M):
  • M-Type 1 (Cultivation; Specialty outdoor; Small)
  • M-Type 1A (Cultivation; Specialty indoor; Small)
  • M-Type 1B (Cultivation; Specialty mixed-light; Small)
  • M-Type 1C (Cultivation; Specialty cottage; Small)
  • M-Type 2 (Cultivation; Outdoor; Small)
  • M-Type 2A (Cultivation; Indoor; Small)
  • M-Type 2B (Cultivation; Mixed-light; Small)
  • M-Type 3 (Cultivation; Outdoor; Medium)
  • M-Type 3A (Cultivation; Indoor; Medium)
  • M-Type 3B (Cultivation; Mixed-light; Medium)
  • M-Type 4 (Cultivation; Nursery)
  • M-Type 5 (Cultivation; Outdoor; Large)
  • M-Type 5A (Cultivation; Indoor; Large)
  • M-Type 5B (Cultivation; Mixed-light; Large)

Adult-Use Recreational (A):
  • A-Type 1 (Cultivation; Specialty outdoor; Small)
  • A-Type 1A (Cultivation; Specialty indoor; Small)
  • A-Type 1B (Cultivation; Specialty mixed-light; Small)
  • A-Type 1C (Cultivation; Specialty cottage; Small)
  • A-Type 2 (Cultivation; Outdoor; Small)
  • A-Type 2A (Cultivation; Indoor; Small)
  • A-Type 2B (Cultivation; Mixed-light; Small)
  • A-Type 3 (Cultivation; Outdoor; Medium)
  • A-Type 3A (Cultivation; Indoor; Medium)
  • A-Type 3B (Cultivation; Mixed-light; Medium)
  • A-Type 4 (Cultivation; Nursery)
  • A-Type 5 (Cultivation; Outdoor; Large)
  • A-Type 5A (Cultivation; Indoor; Large)
  • A-Type 5B (Cultivation; Mixed-light; Large)

Requirements:

  • Cultivation Plan: Detailed Premises Diagram (for Specialty Cottage, Specialty, Small and Medium licenses)
  • Legal Right to Occupy
  • Property Diagram
  • Any Water Source Information
  • Identification of Cannabis Waste Management Plan
  • Applicant Track and Trace Training
  • Proof of Local License, Permit, or Other Authorization
  • Disclosure of any substantially related offenses
  • Each entity shall obtain a separate license for each premises that engages in commercial cananbis cultivation
  • License shall be prominently displayed on premises
  • Seed Production Compliance(for Nurseries)
  • Research and Development Compliance (for Nurseries)
  • Environment Protection Measures
  • Renewable Energy Compliance
  • Generator Compliance
  • Pesticide Compliance
  • Cannabis Waste Compliance
  • Track-and-Trace Sytem Compliance
  • Record Retention
  • Cooperation with any Inventory Audits
  • Inspections Compliance
  • Notification of Theft, Lost, Diversion, or Criminal Activity
  • Bureau's Sample Collection in event of transfer
  • Packaging and Labeling Compliance
  • Weighing Device Compliance
  • If applicable, liense issuance in Impacted Watershed
  • Disclosre of Owners and Financial Interest Holders
  • Sales Invoice or Receipt
  • And More...

Application and Licensing Fees:

Application Fees:
  • Specialty Cottage Outdoor $135
  • Specialty Cottage Indoor $205
  • Specialty Cottage Mixed-Light Tier 1 $340
  • Specialty Cottage Mixed-Light Tier 2 $580
  • Specialty Outdoor $270
  • Specialty Indoor $2,170
  • Specialty Mixed-Light Tier 1 $655
  • Specialty Mixed-Light Tier 2 $1,125
  • Small Outdoor $535
  • Small Indoor $3,935
  • Small Mixed-Light Tier 1 $1,310
  • Small Mixed-Light Tier 2 $2,250
  • Medium Outdoor $1,555
  • Medium Indoor $8,655
  • Medium Mixed-Light Tier 1 $2,885
  • Medium Mixed-Light Tier 2 $4,945
  • Nursery $520
  • Processor $1,040

Licensing Fees:
  • Specialty Cottage Outdoor $1,205
  • Specialty Cottage Indoor $1,830
  • Specialty Cottage Mixed-Light Tier 1 $3,035
  • Specialty Cottage Mixed-Light Tier 2 $5,200
  • Specialty Outdoor $2,410
  • Specialty Indoor $19,540
  • Specialty Mixed-Light Tier 1 $5,900
  • Specialty Mixed-Light Tier 2 $10,120
  • Small Outdoor $4,820
  • Small Indoor $35,410
  • Small Mixed-Light Tier 1 $11,800
  • Small Mixed-Light Tier 2 $20,235
  • Medium Outdoor $13,990
  • Medium Indoor $77,905
  • Medium Mixed-Light Tier 1 $25,970
  • Medium Mixed-Light Tier 2 $44,517
  • Nursery $4,685
  • Processor $9,370

Forms:


Video Guide:

Temporary License Application


Annual License Application

Resources:

CalCannabis Cultivation Licensing
Cannabis Advising Partners: for Cannabis Consulting







California Universal Symbol for Cannabis


California Universal Symbol for Cannabis

Download PNG file or Download JPG file



This site focuses or refers to information and services regarding meat and seafood, and other products infusion Industrial Hemp Advisory Board manufacturing manufacturers who package for other producers Cultivation less than 10,000 cannabis sales and/or consumption local jurisdiction’s ordinances and regulations transporting cannabis goods supply chains for medicinal and adult-use cannabis products limited to a maximum of 1,000 mg per package The California Department of Public Health's Completed Temporary License Application Form manufacturer's name Proposed Section 40133 sampling standards ANTICIPATED ANNUAL (NONTEMPORARY) LICENSE APPLICATION REQUIREMENTS shared-use manufacturing facilities Percentage of ownership Licensees Butane/Hexane/Propane motor carrier permit operating procedures hydrocarbon-based solvents Premises Diagram The Manufactured Cannabis Safety Branch (MCSB) Criminal History manufacturing (Level 1 manufacturing, Type 6) payable to the state of California Microbial Impurities Testing (Escherichia coli and Salmonella spp.) medicinal and adult-use cannabis manufacturing valid waiver basic nutritional information recordkeeping manned motor vehicle Retailer (Type 10) Food-grade Butter/Oil Non-Storefront Retailer (Type 9) cannabis cartoons testing laboratories Local Jurisdictions 600-foot radius of a school annual license application loop system commercial cannabis manufacturers Microbial Impurities Testing (A. fumigatus, A. flavus, A. niger, A. terreus) required limits supplemental label exit packaging an officer or director of a cannabis business security and cannabis waste disposal license review process stickers Ethanol Financial information Financial Interest The Bureau of Cannabis Control (BCC) allergen information 2020 resolutions manufacturing practices hang tag or a peel-back label temporary license three cannabis licensing authorities waste disposal structure and formation documents aggregate interest of 20% or more vape cartridges exception for testing laboratories Bond and Insurance Information 2020 compliance track and trace system medicinal commercial cannabis activity Edibles– Products Local Authorization Mycotoxins Testing ingredient list volatile solvent cannabis cultivation licensing supply chain disposal and destruction methods BUREAU OF CANNABIS CONTROL amount of THC content CDTFA seller’s permit transportation of cannabis goods Cannabinoids Testing Medicinal and Adult-Use Cannabis Regulation and Safety Act dried flower list of artificial food colorings good manufacturing practices 2020 new laws Temporary License Application Information waste management laws THC levels 2020 recent news cannabis products in container or wrapper for sale comply with all packaging and labeling requirements amount of THC/CBD per serving and per package 2020 updates 120 days protocol cultivation (on an area less than 10,000 square feet) public health and safety Temporary event up to 4 days onsite sale and consumption of cannabis goods Operating Procedures laboratory quality assurance commercial cannabis manufacturing activity conducting quality assurance review A-license evidence of rehabilitation surety bond shaped like a human, animal, insect, or fruit Heavy Metals Testing topicals Fingerprints Proposition 65 quality control final form diagram of the business’s layout Cannabis Manufacturing designated structure informational panel Form # CDPH-9041 loan provided to a commercial cannabis business workshops hosted by the Bureau of Cannabis Control Microbusiness Local Issuing Authority Manufacturing (non-volatile) purchasing cannabis products on tribal lands MCSB Business and Professions Code section 26050.1 Transition Period manufacturing cannabis products Identifying information licensing cannabis distributors Arranging for laboratory testing small product packaging Licensee Information LICENSE APPLICATION REQUIREMENTS paper inserted into the packaging secondary packaging Incorporating THC/CBD concentrates CalCannabis Cultivation Licensing Category I Residual Solvents and Processing Chemicals Testing tinctures re-sealable primary panel requirements inhalable cannabis no infusion of alcohol Labor peace agreement Water Activity Testing of Solid or Semi-Solid Edibles compliance with regulations distributors testing methods equity interest in a commercial cannabis business unique ID/batch number cannabis market Extractions using CO2 ownership premises is not within a Government secondary package persons 21 years of age or older Medical Cannabis Regulation and Safety Act of 2015 microbusinesses M-license entry into the legal, regulated market regulations for medicinal and adult-use cannabis Homogeneity Testing of Edible Cannabis Products packaging and labeling testing of cannabis goods Business Organizational convicted of a substantially related crime storage of cannabis goods 2020 proposed changes period of 120 days destruction of cannabis goods Bond in the amount of $5,000 medicinal and adult-use commercial cannabis activity sanitary and hazard-free environment licensed premises medicinal and adult-use or both markets Category II Residual Pesticides Testing immature live plants and seeds being transported from a licensed nursery commercial cannabis products Temporary Cannabis Event commercial cannabis manufacturing in California emergency regulations medicinal and adult use cannabis goods transported together Licensee Lookup Tool child-resistant packaging highly-concentrated oils or waxes no infusion of nicotine cannabis plants Track and Trace the commercial medicinal and adult-use (recreational) Water/Food-grade Dry Ice contaminants nonlaboratory quality control limited to a maximum of 10 mg of THC per serving Terpenoids Testing shares of stock that are less than 5% of the total shares in a publicly traded company sugar California Department of Public Health (CDPH) inventory Carbon Dioxide (CO2) A-license and an M-license 2020 regulations local jurisdiction’s requirements Seller’s permit number 2020 laws delivery vehicle $3,000 of cannabis goods 600 foot radius of a school Owner transportation and security manufacture cannabis products health claims M-licensees Individual Owner financial interest holder security CDPH-issued universal symbol access to the area(s) child-resistant outer package Temporary License Application packaging and labeling requirements Local Authorization Attachment online licensing system premises diagram cannabis industries Standard Operating Procedures (SOPs) licensing scheme conditional license public Licensee Lookup Tool requiring refrigeration MANUFACTURED CANNABIS SAFETY BRANCH edible products inventory and quality control government warning statement label A-license and an M-license for the same commercial cannabis activity Department of Public Health’s Manufactured Cannabis Safety Branch Mechanical three state cannabis-licensing authorities Manufactured Cannabis Safety Branch ISO/IEC 17025 accreditation Premises Information product guidelines state cannabis licensing Moisture Content Testing commercial cannabis manufacturing Transport vehicles alarm system written procedures for inventory control Proposition 64: The Adult Use of Cannabis Act of 2016 at least 20% ownership interest Distributor Transport Only transportation procedures for inventory control Department of Food and Agriculture’s CalCannabis Cultivation Licensing division packaging CO2 and ethanol extractions amount of sodium sales of cannabis goods Application Checklist 2020 fines consumption of alcohol or tobacco health impacts of cannabis licensing cannabis retailers 2020 important information extraction tamper-evident identity of the product pre-made or purchased shipping manifest Category II Residual Solvents and Processing Chemicals Testing licensed cannabis manufacturers Type S share facility space 2020 problems Personnel Requirements compliance with local jurisdiction some nutritional facts Poison Prevention Packaging Act of 1970 (PPPA) persons with a financial interest in the cannabis business Medicinal and Adult-Use Cannabis Regulation and Safety Act (MAUCRSA) Manufactured Cannabis Safety Branch (MCSB) Office of Environmental Health Hazard Assessment (OEHHA) periods of 90 days extensions secured area A-licensees commercial kitchens local jurisdiction certified by a California-licensed engineer Distributor transport minimum standards for extraction processes commercial cannabis activity CALIFORNIA BUREAU OF CANNABIS CONTROL 2020 issues Retailer (nonstorefront) Manufactured Cannabis Licensing System (MCLS) Live Scans for each owner managing member evidence of the legal right to occupy the premises manufacturing activities Physical address operating premises cannabis training Premises diagram Department of Consumer Affairs’ Bureau of Cannabis Control must enter certain events retailers carbohydrates and fat per serving Business Information potentially-hazardous foods adult-use commercial cannabis activity investment into a commercial cannabis business licensed physical location (premises) regulatory framework testing lab California Public Records Act licenses for both medicinal and adult-use cannabis manufacturing at the same premises cultivation regulations for medical and adult-use cannabis in California activity for a period of 120 days cannabis waste labeling 2,000 mg of THC per package for the medicinal-use market MCSB’s temporary license application licensing cannabis microbusinesses onsite consumption of cannabis goods tobacco products licensing and regulating commercial cannabis manufacturers packaging and labeling requirements for pre-rolls remove THC/CBD transport cannabis goods to retailer sanitary workplaces product formulation alcoholic beverages 100 mg of THC per package 2020 revisions chain of custody disposal labels not be attractive at least 99% purity concentrate licensed cannabis distributors separate applications capsules highly-concentrated THC/CBD such as oil, wax and resin member manager property for the commercial cannabis activity Foreign Material Testing scaled to the gross annual revenue of the licensed premises California Department of Public Health opaque exit package finished product disclosure of all criminal convictions mandated warning statements medicinal and adult-use markets licensed cannabis cultivators product as a candy prohibited Category I Residual Pesticides Testing cannabis event organizer license definition of owner edibles packaging opaque Vehicle Requirements local jurisdiction authorization licensing cannabis third-party testing laboratories extracts CDPH-9041 contaminant free Conducting quality assurance review of cannabis goods cannabis adult-use products no added caffeine and more.

In addition, cannabis concentrates Edible cannabis product Type N – for infusions Type 3A (Cultivation; Indoor; Medium) Medium Indoor Type 1C (Cultivation; Specialty cottage; Small) Adulterated Ingredient Type 14 (Cannabis Event Organizer) infused pre-rolls Specialty Cottage Mixed-Light Tier 1 Pathogen Type 1 (Cultivation; Specialty outdoor; Small) Track-and-trace systems Allergen cross-contact Dried flower UID adulteration Type P – for packaging and labeling only Actual yield package flower or pre-rolls Unique identifier Type 6 (Manufacturer 1) Extraction: Non-volatile Solvents, Mechanical Methods Adequate Type 6 – for extraction using a mechanical method or non-volatile solvent (ex: CO2, ethanol, water, or food-grade dry ice, cooking oils or butter) Cannabis product Nonmanufactured cannabis product infused butters and oils as concentrates Type 2 (Cultivation; Outdoor; Small) Distribution Processing Type S (coming soon, shared-use manufacturing facilities) Specialty Cottage Outdoor Net weight Kief Type 2A (Cultivation; Indoor; Small) Flowering Department Indoor cultivation THC limit of 10 milligrams per serving and 100 milligrams per package Package alternate use of a manufacturing premises Track and trace system gross annual revenue for first year in operation under MAUCRSA Manufacture Product Identity cakes, cookies, beverages and juices, tea and coffee, chocolates, gummies, gum, and mints Pre-roll Type 1B (Cultivation; Specialty mixed-light; Small) Type 10 (Retailer) Small Outdoor Allergen list of cannabis manufacturers Mixed-light Tier 1 Medium Mixed-Light Tier 2 Lot Type 3 (Cultivation; Outdoor; Medium) Holding Informational panel Type 9 (Non-Storefront Retailer) Limited-access area Specialty Outdoor Canopy Sanitize Preventive controls Manufacturer licensee Specialty Indoor THC Nursery Type 7 (Manufacturer 2) Extraction: Volatile Solvents Quality control personnel Type 5 (Cultivation; Outdoor; Large) Nonvolatile solvent Finished product Type 12 (Microbusiness) Proposition 65 warning statement Request for Live Scan Quality control operation Type 8 (Testing Laboratory) Mature plant MCSB 90-day extension periods Specialty Cottage Indoor M-license Type 11 (Distributor) Validation Topical cannabis product Labeling Type 4 (Cultivation; Nursery) Outdoor cultivation DPH-17-010E Type 7 – for extraction using a volatile solvent (ex: butane, propane and hexane) Specialty Mixed-Light Tier 2 Volatile solvent Process track and trace system Small Indoor Type N Infusions (optional packaging and labeling) Hazard Contact surface In-process material Commercial-grade, non-residential door lock Applicant Medium Outdoor Type 13 (Distributor Transport Only) Licensee Processing aid Cultivation site Component Quality Verification Monitor Processor Commercial cannabis activity Medium Mixed-Light Tier 1 Pest Infusion products similar to traditional food products prohibited Batch Environmental pathogen Type 5A (Cultivation; Indoor; Large) Small Mixed-Light Tier 1 Serving Wet weight Type 1A (Cultivation; Specialty indoor; Small) Qualified individual Immature plant Bureau CBD from industrial hemp Premises Type 3B (Cultivation; Mixed-light; Medium) Harvest Batch Adult-use Market Mixed-light Tier 2 Extraction Primary panel Microorganisms Universal symbol Type P Packaging & Labeling Only Specialty Cottage Mixed-Light Tier 2 Watts per square foot Theoretical yield Quarantine Small Mixed-Light Tier 2 Type 5B (Cultivation; Mixed-light; Large) CBD Personnel Specialty Mixed-Light Tier 1 Type 2B (Cultivation; Mixed-light; Small) Cultivation Raw material Mixed-light cultivation and more.


Disclaimer: Informational and educational purposes. Self-help services (not legal advice). Site is not affiliated with any state agency. Note that site might not contain the most updated information. Your receipt of any information from this site does not create a relationship. Prior results do not guarantee or suggest a similar result in other matters. No promise is made with regard to services or content's reliability, availabilty, or ability to meet any needs. Information and services provided "AS IS."

All Rights Reserved